Types S, SG, SKOP, SKOPG

Common Technical Features:
  • Housing - Drop-forged (tensile strength of the high-quality material used:  approx. 1,000 N/mm2
  • Taper Shank without Bore - Therefore it is not weakened.  Thus high moments of deflection can be obtained without any permanent bend to the large taper diameter.
  • High Concentricity accuracy - Guaranteed by the test report.
  • Large-dimensioned precision roller bearings, free from clearance - for taking up the radial and axial forces.  No bearings in the taper shank.
  • Seal Ring - Protects the bearings from dirt and coolant.
Type S, SG centerpoint 60°

Technical Features:
  • Concentricity Runout
    - Type S  max. .005 mm (.0002")
    - Type SG  max. .003 mm (.0001")
  • Two Series
    - slim design for light-duty work
    - with stronger bearings for normal high duty service
  • With thread for draw-off nut
  • For circular grinding operations we recommend the use of our supplementary seal (see below)
Applications:
  • Type S:  for copy-turning, NC-turning, roughing, finishing, fine-turning
  • Type SG:  for turning and grinding operations demanding high accuracy
Technical Data:
ID No. S 5001 5001-2 5001-3 5002 5003 5006 5004 5007 5005 5008 5009
ID No. SG 5121 5121-2 5121-3 5122 5123 5126 5124 5127 5125 5128 5129
Max workpiece weight daN 120 140 140 280 400 525 700 1000 2000 2500 3500
Max RPM 7000 7000 7000 5500 5500 5000 5000 4000 3500 2300 2300
Supplementary Seal ID No. V13 V13 V13 V20 V20 V25 V25 V35 V45 V58 V58
- High-Performance live centers for heavy-duty work with MT 6 (140006/141006), metric taper, taper 1:10 and with tailstock sleeve support:  see High Performance Live Centers for Heavy Duty Machining.

Dimensions (mm) for Types S and SG
ID No. S 5001 5001-2 5001-3 5002 5003 5006 5004 5007 5005 5008 5009
ID No. SG 5121 5121-2 5121-3 5122 5123 5126 5124 5127 5125 5128 5129
Morse Taper 1 2 3 2 3 3 4 4 5 5 6
d 13 13 13 20 20 25 25 35 45 58 58
D 32 32 32 45 45 58 58 76 95 120 120
IA 20 20 20 25 25 35 35 43 60 64 64
IB 40 40 40 51 51 59 59 68 89 102 102
IC 65 65 65 82 84 102 102 121 160 179 179

Type SKOP, SKOPG centerpoint 60°/40° extended

Technical Features:
  • Concentricity Runout
    - Type SKOP max. 0.005 mm (.0002")
    - Type SKOPG max. 0.003 mm (.0001")
  • Type Series
    - slim design for light-duty work
    - with stronger bearings for normal to high-duty work
  • With thread for draw-off nut
  • For operations involving heavy flows of coolant or large quantities of dust and dirt, we recommend the use of our supplementary seal (see below)
Applications:
  • Type SKOP:  for copy-turning, NC-turning, roughing, finishing, fine-turning
  • Type SKOPG:  for turning operations demanding high accuracy
Technical Data:
ID No. SKOP 5362 5363 5366 5364 5367 5365 5369
ID No. SKOPG 5362 G 5363 G 5366 G 5364 G 5367 G 5365 G 5369 G
Max workpiece weight daN 230 300 480 480 850 1500 2700
Max RPM 5500 5500 5000 5000 4000 3500 2300
Supplementary Seal ID No. V20 V20 V25 V25 V35 V45 V58

Dimensions (mm) for Types SKOP AND SKOPG
ID No. SKOP 5362 5363 5366 5364 5367 5365 5369
ID No. SKOPG 5362 G 5363 G 5366 G 5364 G 5367 G 5365 G 5369 G
Morse Taper 2 3 3 4 4 5 6
d 20 20 25 25 35 45 58
dA 6 6 8 8 10 12 20
D 45 45 58 58 76 95 120
IA 30 30 42 42 54 70 84
IB 51 51 59 59 68 89 102
IC 87 89 109 109 132 170 200